Front loader TN-450P
The TN tractor frontloader is a highly productive tractor attachment, designed for an efficient use in agriculture and construction , for conveying material etc. The TN tractor frontloader itself can be mounted and dismounted very easily, if some other tractor attachment is required. The loader is mounted to the tractor by a mounting frame, which must be chosen according to the type of the tractor.
A wide range of quickly and simply exchangable implement tools can be attached to the loader. The parallel linkage, the standard equipment of the TN tractor frontloader, keeps the implement tools levelled during lifting or lowering, and assures a large working capacity.
Standard version of loader:- 2 double - acting lifting cylinders
- 2 tool turning cylinders
- Mechanical parallel guidance and relief valve
- Bucket level indicator
- Support leg
- One el. Line D1(one par double acting connectors)
- Two el. Line D2 (two par double acting connectors)
- Damping system (smooth operation with tractor and loader)
- multiblock (automatic connection of several hyd. and el. lines)
Mountable to tracktors (kW/KM) | 45-65/60-90 |
Own weight (kg) | 490 |
Q2 – Lift power at turning point in raised position(kg) | 1930 |
Q4 – Lift power at bucket center of gravity in raised position(kg) | 1480 |
R – Breakout force on bucket edge (kN) | 26 |
Lift cylinder (mm) | ø70/ø45 |
Tool turning cylinder (mm) | ø70/ø35 |
A – Height of the buckets edge from the ground (mm) | 3780 |
B – Height of the buckets edge from the ground | 3050 |
D – Digging depth with Bucket (mm) | 150 |
α – Max. Tools closing angle in lowered position | 40° |
β – Max. Tools opening angle in raised position | 50° |
Operation of the implement tools | HP |
DA – Double-acting cylinder
HP – Mechanical parallel guidance and relief valve
Technical data are valid at pressure p=175 bar